1. Install Flashtool PC and wait for it to finish Go to the directory C: \ Flashtool \ drivers \ Doubleclick Flashtool-drivers.exe Tick Flashmode Drivers and Fastboot Drivers> Click Install
2. If the Windows Security warning appears only select Install this driver software anyway Make sure the driver has been successfully installed as shown below
3. Extract XM Single Loader (C190X.rar). Then copy the contents (including the folder C190X) to the directory C: \ Flashtool \ devices \ (replace) . flasing XM:
4. Ekstak C1905_15.4.A.0.23_Generic PL.ftf then copy the file to the directory C: \ Flastool \ firmwares \ Open the program Flastool> Click Flash (lightning logo)
5. Select Flashmode> OK 6. Select XM Single JB Firmware 4.3> Save Flash Additional options allow selection of the tick in its default state (not change) optional: You can unchecklist selection DATA CACHE and if it does not want the data and applications on XM deleted (but I recommend just checked that its net Flash)
6. Wait for the process of preparation flasing completed until the popup as shown below
7. Turn off XM XM is off connect to a PC via USB cable while pressing the Volume Down (-). Do not be released until popup lost and display a description of: - INFO - Start Flashing
8. So far the flashing process is running Wait until the caption: - INFO - Flashing Finished - INFO - Please unplug and start your phone
9. Congratulations! XM already succeeded in flash! Unplug the USB cable and then just turn on XM (booting the first time might be a bit long, but it was normal, just wait )
thanx for coming...best regard
No comments:
Post a Comment